Jointing guide 
Calculator 
Ardex SK 100W
- Waterproof and crack-bridging.
- For walls and floors, indoors and outdoors.
- Uniform layer thickness and ready for subsequent work quickly.
Need personalised advice?
Contact usDispatched tomorrow
- In-stock items dispatched tomorrow!
- Orders of €1,250 or more qualify for free delivery.
- Pay your way with iDeal or Bancontact
Product information
ARDEX SK 100 W is a TRICOM membrane for waterproofing walls and floors beneath tiling. Suitable for a wide range of indoor and outdoor applications. The membrane consists of polypropylene fleece laminated on both sides with polyethylene film and provides a uniform layer thickness during installation.
The membrane is waterproof, crack-bridging and alkali-resistant. ARDEX SK 100 W can be used indoors in water exposure classes W0-I, W1-I, W2-I and W3-I. It is also suitable for reservoirs and basins in water exposure class W1-B and for balconies and patios to be finished with tiles.
ARDEX SK 100 W can also be used to uncouple ceramic tiles, natural stone and concrete tiles in residential and commercial buildings under loads of up to 2 kN per m². When bonded with ARDEX 7+8 waterproofing adhesive, tiling can begin after approximately 2 hours.
Application instructions
- Use only on dry, flat and sufficiently load-bearing substrates.
- Suitable for walls and floors, indoors and outdoors.
- Product thickness: approximately 0.51 mm.
- Weight: approximately 315 g/m².
- Membrane width: approximately 1 metre.
- Temperature resistance: approximately -35°C to +90°C.
- Burst pressure: approximately 3.0 bar.
- Crack-bridging capacity: greater than 0.4 mm.
- Shelf life: approximately 24 months in unopened original packaging. Store in a cool, dry place.
Step-by-step guide
- Ensure the substrate is dry, flat, free from separating layers and sufficiently load-bearing.
- Cut the waterproofing membrane to size beforehand using scissors or a sharp knife.
- Apply ARDEX X 77, ARDEX S7 PLUS or ARDEX 7+8 to the substrate using a 3 mm notched trowel. Use a 4 mm notch on rough substrates.
- Lay the membrane into the fresh material and press it down completely flat, leaving no voids.
- Lay the membrane sheets with butt joints or overlaps, depending on the chosen system build-up.
- Finish seams, transitions and connections with the appropriate ARDEX system products, such as ARDEX SK 12, sealing collars and corner pieces.
- When installed with ARDEX 7+8, tiling can begin after approximately 2 hours.
Documentation
You may also be interested in
Dispatched tomorrow!
Dispatched tomorrow!
Dispatched tomorrow!
Reviews
Rating
- 5 stars (0)
- 4 stars (0)
- 3 stars (0)
- 2 stars (0)
- 1 star (0)
All reviews
There are no reviews yet.
Ardex SK 100W
-
Waterproof and crack-bridging. -
For walls and floors, indoors and outdoors.
-
Uniform layer thickness and ready for subsequent work quickly.