ROMFIX Draindeco
- Strong, fully water-permeable gravel surface
- Vandal-proof
- Ideal for driveways and decorative surfaces
Not sure how much you need? Calculate it here:
CalculatorDispatched tomorrow
- In-stock items dispatched tomorrow!
- Orders of €1,250 or more qualify for free delivery.
- Pay your way with iDeal or Bancontact
Product information
ROMFIX Draindeco is a binder for decorative gravel and chippings. This two-component synthetic resin binds loose decorative aggregates together. Typical applications include tree pits, parking spaces, roof terraces, accessible footpaths, drip strips beneath thatched roofs and other public spaces. Draindeco is water-permeable and prevents gravel or chippings from spreading. It is ready to use and easy to apply, without adding water. Further benefits include reduced vandalism and maintenance, with a durable, neat finish for tree pits. One set of ROMFIX Draindeco binds 75 kg of gravel or chippings. Coverage per square metre depends on aggregate size, layer thickness and application. Its open voids provide ample water permeability, and it is ideal for gravel or chippings with a grading of up to 16 millimetres. Under heavy loads, including traffic loads, use ROMFIX E’ Grid to absorb tensile stresses at the underside. ROMFIX Draindeco is intended for dark decorative gravel and chippings. It is less suitable for light-coloured aggregates, marble, limestone and sand-lime brick because exposure to UV radiation can cause yellowing.
Flexible surface layer
ROMFIX Draindeco consists of two layers: a water-permeable sub-base at least 10 cm thick and a hardened 3 cm surface layer of epoxy resin-bound chippings. The chippings can no longer spread, and because the resin bonds only to the aggregate, it creates a gas- and water-permeable layer that can easily be shaped to any profile. Although the open structure is not completely weed-free, it can be cleaned with a pressure washer. Depending on the construction, the hardened surface layer can withstand traffic loads of approximately three tonnes. For traffic loads of approximately three tonnes, the recommended layer thickness is five centimetres over an unbound base and three centimetres over a water-permeable bound base.
Tip! Use only clean decorative gravel or chippings. Rinse the dust off the aggregate and allow it to dry thoroughly before adding the two components.
A considered choice
ROMFIX drainage bedding mortar and paving jointing mortar are designed with sustainability and circularity in mind. After years of use, our products can be recycled and given a new role in the material cycle.
Application
Application instructions
- Working time: 20–30 minutes at an application temperature of +20°C
- Substrate temperature: > 0°C (≤ +30°C)
- Apply in dry weather
- Lower temperatures extend the curing time
- Higher temperatures shorten the curing time
- Ready for foot traffic after 24 hours; fully ready for use after 6 days (at a substrate temperature of approximately +20°C)
Step-by-step guide
- Mix 75 kg (3 x 25 kg) of clean, dry gravel or chippings in the mixer. While mixing, slowly add the entire 3 kg resin/hardener component. Mix for at least 5 minutes in total.
- Pour the mixture onto the surface to a layer thickness of at least 50 mm and spread evenly. Place a temporary PVC ring around the tree trunk to keep it clear of ROMFIX Draindeco.
- Compact the mixture with a tamper or light plate compactor. Thorough compaction is crucial to the service life of the finished surface.
- Manually fill the PVC ring around the tree trunk with loose, clean gravel or chippings that have NOT been mixed with the resin/hardener components. Once it is completely filled, remove the PVC ring. This leaves room for the tree trunk to increase in diameter.
Documentation
You may also be interested in

Dispatched tomorrow!

Dispatched tomorrow!

Dispatched tomorrow!
Dispatched tomorrow!
Reviews
Rating
- 5 stars (0)
- 4 stars (0)
- 3 stars (0)
- 2 stars (0)
- 1 star (0)
All reviews
There are no reviews yet.
Specifications
| Load capacity | Pedestrians, passenger cars |
|---|---|
| Unit | Bottle |
| Contents | 3 kg |
| Application | Bonding |
| Suitable for | Decorative gravel, footpaths, patios |






